Swatch kit on request · Samples in 3–7 days · FOB Xiamen · Request a quote
Home/Quality control
Quality control

Twelve places
a defect can be caught.

Not a certificate on a wall — the actual sequence the batch goes through before it is allowed into a carton.

01

Incoming fabric

Shade and weight checked per roll against the approved standard.

02

Weaving defects

Rolls inspected under light for pulls, slubs and weaving gaps.

03

Panel dimension

Cut panels measured against the dieline before sewing.

04

Grain alignment

Print and pattern position checked across the seam line.

05

First-off print

First piece off the screen compared to the approved proof, then signed off.

06

Colour consistency

Periodic pulls during the run; the batch is stopped if drift appears.

07

Stitch density

Seam and hem stitch counts checked at three points per canopy.

08

Rib attachment

Every rib end and tip checked for pull-out resistance.

09

Opening cycle

Each umbrella opened and closed; crank and tilt cycled on commercial models.

10

Hardware function

Runner, lock, tilt joint and hub checked for smooth travel without binding.

11

Final visual

Full inspection under light: stains, loose threads, print position, symmetry.

12

Packing audit

Count, carton mark, label placement and poly bag checked before sealing.

Inspection

Third-party inspection is welcome.

Book SGS, BV, TÜV or your own agent. We will arrange access, provide the packing list and hold the container until the report is released. If the inspection finds a real defect, we rework or replace before it ships — that is better for both of us than a claim at destination.

We will send the AQL level and sampling plan we work to on request, along with the photo record of your batch at semi-finished and finished stages.

Certificates are issued with the quotation. Send us the destination market and we will confirm which certificates and test reports apply, then attach the scans. We do not print a compliance mark we cannot produce a current document for.
Claims we make in writing. Fabric weight, rib count, canopy dimension and print method are written into the PI. If the delivered goods differ from the PI, that is our cost, not yours.
Certifications

What the paperwork covers.

Social compliance and quality management apply to the factory; the rest are product or material standards, issued per order and per destination market.

Factory and product compliance
StandardScopeApplies toIssued
BSCISocial compliance auditFactoryAudit report on request
ISO 9001Quality management systemFactoryCertified — copy on request
UTSThird-party product test reportFabric and finished productReport on request
CEProduct complianceEU ordersDeclaration with order
REACHChemical complianceEU ordersTest report on request
PROP 65California chemical disclosureUS ordersTest report on request
CPSIA / EN 71Children's product safetyKids umbrellasTest report on request
OEKO-TEX Standard 100Fabric safetyOn requestMill certificate
GRSRecycled content (rPET canopy)On requestTC through your brand
SGS / ITSThird-party inspection and testingAny orderReport per shipment

Need a standard that is not listed? Ask before the order — arranging a new test takes weeks, and a buyer who finds out late has already lost a season.

Read this first. Most of what follows is optional, not standard on every order. Eco materials cost more and take longer to source. We would rather list them honestly than print a green claim that does not survive an audit.
Options, cost and documentation
OptionWhat it isStandard or optionalDocumentation
rPET canopy Canopy woven from recycled PET, GRS certified Optional, per order GRS scope certificate + TC issued through your brand
OEKO-TEX fabric Standard 100 certified fabric, tested for harmful substances Optional; some base fabrics are certified by default Mill certificate
C6 water repellent Fluorocarbon finish that is REACH compliant Standard on most outdoor models REACH test report
FSC paper packaging Certified board for colour boxes and hang tags Optional FSC chain-of-custody on the printer
Recyclable poly bag Recyclable LDPE instead of standard OPP Optional Material declaration
The GRS detail

Why the logo needs a TC,
and the TC needs you.

A GRS scope certificate proves the factory is allowed to handle recycled material. It does not, on its own, let you print the GRS logo on a canopy. That requires a Transaction Certificate (TC) issued for a specific shipment, in the name of the brand that will sell it.

In practice: you place the order, we produce with certified rPET, and the certifying body issues the TC against the invoice. We supply the production records and the material certificates; the TC application sits with your brand. We will walk your compliance team through it — most first-time buyers get stuck exactly here.

On the factory floor. Energy-efficient machinery and wastewater recycling are in place because they lower cost, not for a certificate. We are not claiming a carbon-neutral factory, and we will not put a number on our footprint without a measurement we can show you.
On durability as sustainability. The most sustainable umbrella is the one still in use in year five. Solution-dyed fabric and replaceable canopies do more for waste than a recycled label does — which is why we push them for commercial stock.

Need the inspection report format?

Ask for a sample QC report from a recent shipment — it shows exactly what we check and how we record it.